| | |
|
| |
| | |
|
|
Rail B5100B Bending
B5100B (6109B)
Bending Rail 1-7/8" w x 2-7/8" h with Mold
Outside Beads applied after rail is bent (2 processes to bending this rail)
Minimum order on non-stock rail is 8 feet.
Construction: Solid - All plies solid and laminated. Exceptions: Alder may have 1-joint in 10'-16'. Beech may have 1-joint 12'-16'. Birch may have 1 joint 10'-16'; Walnut may have 1-joint in 7'-10' and 2 joints in 11'-16'. White Oak may have 1-joint 12'-16', bottom plys may have 2-joints. Other species for orders exceeding 30% of 16' long, rail may include up to 1 joint per ply
Lengths: Rail is available up to 30' long. Call for a quote on lengths over 16'. Straight and Bending Rails over 16' in solid ply construction will have 1 finger-joint per ply (some species including White Oak may have 2). Long length setup charges are per profile per order.
Many rails are stocked for immediate shipment. Some rails are stocked in limited lengths.
Stock rail is sold in 4', 5', 6', 7', 8', 9', 10', 11', 12', 14' & 16' lengths.
Non-stock rails and plowed rails have an 8' minimum order.
Email for pricing and lead-time on rail over 16' Alder is clear and may have tight pin knots. ( E-mail for quote on Knotty Alder)
Walnut may have some heartwood (white in appearance). Walnut with no sap requires a special quote.
Hickory has both heartwood and sapwood. A range of colors is not a defect.
Please check your local building codes to verify if the style you have chosen is approved for that local.
The Run, Rise and Radius must be constant where Bending Rail is used. The minimum recommended radius to use Bending Rail successfully on Rake Rails is 30 for 5100B. The minimum recommended radius to use Bending Rail successfully on Balcony Rails is 36 for this profile.
NOTE: Wood is a natural material and different pieces may bend differently. More than one attempt may be necessary to obtain the radius you need even if your radius is within the recommended radius. Bending rails that break during the bending process are not a manufactured defect. Pre-bent rail is available for tight radius or other applications. Call for a quotation.
Price: From $96.00 to $416.00
1-7/8"w x 2-7/8"h. (6109)
| | |
|
Updates:
- Aluminum Disappearing Stairs up 20% April 1, no change in wood pricing
- Most hardware prices will increase due to tariffs as a running change.
- Iron Stairparts increase 25% May 12th, select wood pricing increase TBD
- Schlage Commercial up 2% 3/17/25
- HBG Chamfered Post, 82001, delays in shipping till June 1st
- Schlage Overstock BLOWOUT - contact our office!
|
|