| | |
|
| |
| | |
|
|
Flush Architectural Doors
|
|
Price: Reference Information
|
Unless specified otherwise B&B will choose the manufacturer for custom commodity and architectural doors with the highest quality and best price.
All of our flush doors can be produced with Architectural Specifications. Please specify if you require a bonded core or an architectural grade door skin.
Flush doors can be pre-finished on a factory order. Below is a link to the standard finished. Custom finishes are also available.
If you intend to paint your doors we highly recommend you order your doors primed.
FAQ
Q) What is the thickness of the veneer?
A) Architectural doors have a thicker veneer than commodity doors. The veneer thickness can change depending on the veneer specie. Typically the thickness on Birch is about 1/42", the thickness on White Oak is about 3/64.
Q) Can I order a thicker veneer than the standard?
A) Yes under most circumstances. When you change the veneer thickness the manufacturer has to change the core thickness to accommodate the change in the door skin. This will increase the cost and the lead time.
Q) What are the door stiles made of and how thick are they?
A) The stiles are the same specie as the veneer (prime doors will have a hardwood chosen by the manufacturer). Some door species like Birch will use a hardwood that is very close to the veneer specie. In the case of Birch the stile will be Maple. The thickness of the stile will vary based on the core of the door. Typically a particle core door will have a 7/8" thick stile before trimming.
|
|
Updates:
- Fypon 3% increase January 17
- HBG, January 1 increase
- StairTrends adjustments February 1
- Schlage up 2/27/26: 6.5% to 13.5%
|
|